Description
High strength ceramic designed for permanent molecular protection 9H. Special for protection of all types of vehicles, automobiles, boats, motorcycles etc. Protects for up to 2 years. It can be applied to rims, glass, sheet and plastics. Anti UVA, anti-corrosion, more shine and an excellent hydrophobic effect.
INSTRUCTIONS FOR USE
Read the instructions for use provided on the packaging thoroughly before any application. Consumption of approximately 25ml per car.
To ensure a perfect application, follow the following recommendations:
1. Apply the product on a surface that is preferably polished, clean, free from grease or wax contamination,
2. Apply to cold surfaces, out of sunlight, avoid wet areas.
3. Must be applied between 5th and 25th.
4. Use the suedes and foam applied to make the application by placing 8 to 9 drops per pass.
5. Apply in crossed movements so that the surface is shiny and completely homogeneous.
5. Make areas of a maximum of 60×60 cm.
6. Allow to dry, summer 30 seconds – winter 60 seconds and then gently remove with the supplied microfiber until the surface is clean and free of residue.
7. With natural light, check for any imperfections and correct if necessary.
8. Initial curing 24h, avoid any touch on the ceramic during this period. Total curing time 3 days, during this period you should avoid wetting the treated surface.
Maintenance:
Regularly wash the surface with neutral shampoo or diamond wax shampoo using microfiber wash mitt. Always dry the surface after washing with the wisted loop drying towel. You can also help with maintenance after each wash, apply the ceramic exterior detailer or the lotus silk quick detailer.
PRECAUTIONS
Do not ingest. Keep out of the reach of children.
Very flammable liquid and vapours. Harmful if swallowed.
Causes severe skin burns and serious eye damage.
Do not ingest. In case of ingestion, contact the poison control centre/doctor.
ANTI-POISON INFORMATION CENTER TEL. 800 250 250.